| CCTV主楼悬臂部位大型塔式起重机安装技术 |
| |
| 引用本文： | 张鹏,陈振明,彭明祥.CCTV主楼悬臂部位大型塔式起重机安装技术[J].施工技术,2009,38(4). |
| |
| 作者姓名： | 张鹏 陈振明 彭明祥 |
| |
| 作者单位： | 1. 北京交通大学,北京,100044
2. 中国建筑股份有限公司,北京,100037 |
| |
| 摘 要： | CCTV主楼塔楼双向倾斜,塔楼1、2分别安装1台M1280D和1台M600D动臂式塔式起重机,4台塔式起重机拆除难度大,需要先移装2台M600D塔式起重机至悬臂部位.重点介绍,M600D塔式起重机悬臂支撑没计以及附着设计和加工.指出可以通过对桁架增加立柱的方式对悬臂进行加固;另外,附着杆的增加可以降低起重机对下部悬臂桁架的不利荷载.最后介绍了悬臂部位M600D移位安装流程.
|
| 关 键 词： | CCTV主楼 塔式起重机 悬臂 安装 |
Installation of Tower Crane Used in Cantilever of CCTV Main Building |
| |
| Zhang Peng,Chen Zhonming,Peng Mingxiang.Installation of Tower Crane Used in Cantilever of CCTV Main Building[J].Construction Technology,2009,38(4). |
| |
| Authors: | Zhang Peng Chen Zhonming Peng Mingxiang |
| |
| Affiliation: | 1. Beijing Jiaotong University;Beijing 100044;China;2. China State Construction Engineering Co.;Ltd.;Beijing 100037;China |
| |
| Abstract: | The towers of CCTV main building have directional incline,and one M1280D and one M600D whip-typed tower crane for No.1 and No.2 tower are installed separately,which are difficult to be disassembled,so two M600D tower cranes need to be installed to cantilever position. The cantilever support design and attachment design and processing for M600D tower crane are described in detail. It is pointed out that adding column for truss can strength the cantilever,and adding attached bar can reduce unfavorable load of... |
| |
| Keywords: | CCTV main building tower crane cantilever installation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
