|
|||||
|
|
| PA／PP—g—MAH／PP共混物的界面和形态研究 | |
| 引用本文： | 占德权 周立庆 等. PA／PP—g—MAH／PP共混物的界面和形态研究[J]. 中国塑料, 2002, 16(9): 22-25 |
| 作者姓名： | 占德权 周立庆 等 |
| 作者单位： | 天津大学材料科学与工程学院 天津300072(占德权，周立庆)，天津大学材料科学与工程学院 天津300072(沈宁祥) |
| 摘 要： | 用小角X光衍射和偏光显微镜等方法研究了具有相容区的PA101／PP-g-MAH/PP熔融共混物的界面和结晶开态，PA101和PP－g-MAH在熔融共混过程中生成新的基团，在相间存有界面，体系中两相的结晶形态均匀，共混物的拉伸屈服强度随着界面层厚度的增大而提高。 |
| 关 键 词： | PA／PP－g－MAH／PP共混物 形态 研究 聚酰胺 聚丙烯 接枝马来酸酐 界面层 |
Interface and Morphology of PA/PP-g-MAH/PP Blend |
|
| ZHAN De quan,ZHOU Li qing,SHEN Ning xiang. Interface and Morphology of PA/PP-g-MAH/PP Blend[J]. China Plastics, 2002, 16(9): 22-25 | |
| Authors: | ZHAN De quan ZHOU Li qing SHEN Ning xiang |
| Abstract: | PA1010/PP blend and PA1010/PP g MAH/PP blend were studied.The experiment data of SAXS show that there is no interface layer in the PA1010/PP blend,but it is opposite in the PA1010/PP g MAH blend.And the interface layer thickness in the latter blend depends on the content of PP g MAH.It was shown that the yield strength of PA1010/PP g MAH/PP blend was improved with the increasing of the interface layer thickness.The result of POM also shows that the even of crystallization morphology of the PA1010/PP blend was improved by PP g MAH phase.All of these indicate that PP g MAH has compatibility effect on PP/PA1010. |
| Keywords: | polyamide 1010 polypropylene PP-grafted MAH interfacial layer |
| 本文献已被 CNKI 维普 等数据库收录！ | |