| 弹性耳塞套橡胶模设计 |
| |
| 引用本文： | 石海水. 弹性耳塞套橡胶模设计[J]. 模具工业, 2012, 38(7): 60-61 |
| |
| 作者姓名： | 石海水 |
| |
| 作者单位： | 科维彤创(厦门)电子工业有限公司,福建厦门,361006 |
| |
| 摘 要： | 介绍了一种新式的黑色弹性耳塞套橡胶模结构,采用低成本的传统液压生产工艺,满足了高质量、低成本要求,实现批量生产,对生产类似制件具有一定的参考作用。
|
| 关 键 词： | 橡胶模 黑色弹性耳塞套 液压生产工艺 |
Development of mould for elastic earplug casing |
| |
| SHI Hai-shui. Development of mould for elastic earplug casing[J]. Die & Mould Industry, 2012, 38(7): 60-61 |
| |
| Authors: | SHI Hai-shui |
| |
| Affiliation: | SHI Hai-shui (Coactive Technologies (Xiamen) Electronics Co., Ltd., Xiamen, Fujian 361006, China) |
| |
| Abstract: | A new mould structure for a black elastic earplug casing was developed which can be made by traditional hydraulic process and meets the requirements for high quality and low cost products. |
| |
| Keywords: | mould for rubber black elastic earplug casing hydraulic process |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
