An analysis of a pulse combustion drying system

The paper presents a theoretical and experimental analysis of a pulse combustion spray drying system. Measurements of the velocity flow field inside the drying chamber and extensive tests on drying and water evaporation were carried out for various feed rates and operating parameters of the pulse combustor. Each test included the analysis of temperature distribution in the dryer, evaporation level and sprayed material structure. LDA and PDA techniques were employed to determine the character of pulsating flow in the chamber, amount of water evaporated and to perform a profound analysis of spray structure. Experimental results show an intensive and efficient drying process. An attempt was made to perform theoretical predictions of velocity and temperature distribution in the drying chamber. The CFD technique was used to calculate time-dependent flow in the chamber. Results show vanishing velocity, pressure and temperature oscillations along the length of the drying chamber. Temperature oscillations decline faster than oscillations of pressure and velocity. Satisfactory agreement between calculations and experimental results was found in certain regions of the drying chamber. Discrepancies might be caused by simplification of the system geometry and flow pattern which were assumed to perform calculations in reasonable time.