首页 | 本学科首页   官方微博 | 高级检索  
     

卷烟企业风力送丝自适应控制系统的开发
引用本文:黄晓华,沈丁洋,赵国平,张弛,任冠峰.卷烟企业风力送丝自适应控制系统的开发[J].中国烟草学报,2018,24(5):124-129.
作者姓名:黄晓华  沈丁洋  赵国平  张弛  任冠峰
作者单位:1.红云红河烟草(集团)有限责任公司昆明卷烟厂,云南省昆明市五华区红锦路366号 650231
基金项目:云南中烟工业有限责任公司科技项目“卷烟企业除尘风机节电系统研究与应用”2016QT01
摘    要:为实现精准控制风送速度,减少风力输送造成的烟丝造碎,建立了风力送丝系统自适应控制系统。该系统可实现电机频率动态控制、风压和风速双闭环串级控制,可依据卷烟机开机台数、要料信号快速、准确调节电机输出频率和各支管风速。试验表明系统正常运行时风速调节可在2 s内完成,风速控制标准差小于0.638 m/s。系统对减少烟丝造碎具有正向改善作用,可减少单箱烟丝消耗1.14%。 

关 键 词:卷烟厂    风力送丝    风速    电机频率    自适应控制系统    碎丝率    单箱耗丝量
收稿时间:2018-04-21

Development of self-adaptive controller for pneumatic tobacco feeding system in cigarette factories
Affiliation:1.Kunming Cigarette Factory, HongyunHonghe Tobacco (Group) Co., Ltd., Kunming 650231, China2.Shanxi Lepro Power Saving Technology Co., Ltd., Taiyuan 030009, China
Abstract:In order to achieve precise control of pneumatic velocity and reduce broken tobacco, an adaptive control system for tobacco pneumatic conveying was established.The system can realize dynamic control of motor frequency as well as the double closed loop cascade control of wind pressure and wind speed.With such proposed system, a rapid and accurate regulation of motor output frequency and wind speed of each branch pipe can be realized according to the number of cigarette makers in operation and material feeding signal.Results showed that the system could quickly adjust wind speed within 2 s, with the standard deviation of wind speed control less than 0.638m/s; the system has a positive effect on reducing the broken tobacco and saves 1.14% of tobacco. 
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《中国烟草学报》浏览原始摘要信息
点击此处可从《中国烟草学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号