| 双圆弧齿轮齿面啮合特性的仿真分析 |
| |
| 引用本文： | 李红梅,王铁,张瑞亮,武志斐.双圆弧齿轮齿面啮合特性的仿真分析[J].煤矿机械,2011(10):78-80. |
| |
| 作者姓名： | 李红梅 王铁 张瑞亮 武志斐 |
| |
| 作者单位： | 太原理工大学齿轮研究所; |
| |
| 摘 要： | 基于双圆弧齿轮的啮合原理和加工原理,论述了齿面啮合特性仿真的算法,并用MATLAB开发了一套完整的仿真程序。对给定参数的齿轮副进行计算机仿真,模拟出真实工作情况下齿轮的接触区和运动误差曲线,接触区近似椭圆状,传动误差曲线近似抛物线。同时在滚动试验机上对试验齿轮进行检查,将通过试验得到的接触区和仿真结果进行对比,从而验证了算法的正确性。
|
| 关 键 词： | 双圆弧 啮合 接触区 传动误差曲线 |
Simulation Analysis of Double Circular-arc Gear Tooth Surface Meshing Characteristics |
| |
| LI Hong-mei,WANG Tie,ZHANG Rui-liang,WU Zhi-fei.Simulation Analysis of Double Circular-arc Gear Tooth Surface Meshing Characteristics[J].Coal Mine Machinery,2011(10):78-80. |
| |
| Authors: | LI Hong-mei WANG Tie ZHANG Rui-liang WU Zhi-fei |
| |
| Affiliation: | LI Hong-mei,WANG Tie,ZHANG Rui-liang,WU Zhi-fei (Gear Research Institute,Taiyuan University of Technology,Taiyuan 030024,China) |
| |
| Abstract: | Based on principle of meshing and processing of double arc gear,this paper discussed algorithm of tooth surface meshing characteristic simulation and developed a complete set of simulation program with MATLAB.The simulation is made on given parameters gear,the gear contact area and transmission error curve are gained,the contact area is approximate elliptic shape and transmission error curve is approximate parabola.At same time,the rolling test is carried on,compared to simulation results,the correctness of... |
| |
| Keywords: | double circular-arc mesh contact area transmission error curve |
| 本文献已被 CNKI 等数据库收录！ |
|
