首页 | 本学科首页   官方微博 | 高级检索  
     

电子装备状态监测系统研究
引用本文:韩东,李洪儒,李永军.电子装备状态监测系统研究[J].兵工自动化,2006,25(9):20-20,39.
作者姓名:韩东  李洪儒  李永军
作者单位:军械工程学院,导弹工程系,河北,石家庄,050003;军械工程学院,导弹工程系,河北,石家庄,050003;军械工程学院,导弹工程系,河北,石家庄,050003
摘    要:车载分布式电子装备状态监测系统由中央处理、信号监测和无线通信等分系统组成.中央处理分系统采用Apro T5加固便携机.信号监测为基于PC104的数采系统.无线通信由3块STR-18型微功率无线数传模块组成.软件使用VC 6.0编写,包括控制管理、信号监测、状态评估、故障预测和维修辅助决策等模块.该系统可监测电子装备的关键信号,并能预测发生的故障,提出辅助维修决策方案.

关 键 词:状态监测系统  电子装备  故障预测
文章编号:1006-1576(2006)09-0020-01
收稿时间:2006-03-03
修稿时间:2006-03-032006-06-26

Study on State Monitor System for Electronic Equipment
HAN Dong,LI Hong-ru,LI Yong-jun.Study on State Monitor System for Electronic Equipment[J].Ordnance Industry Automation,2006,25(9):20-20,39.
Authors:HAN Dong  LI Hong-ru  LI Yong-jun
Affiliation:Dept. of Missile Engineering, Ordnance Engineering College, Shijiazhuang 050003, China
Abstract:A tank-based distributed state monitor system of electronic equipment is composed of central processing sub-system, signal monitor sub-system and wireless communicating sub-system. Central processing sub-system adopted Apro T5 reinforced portable computer. Signal monitor sub-system was a data acquisition system based on PC104. Wireless communicating sub-system consists of three STR-18 micro-power wireless data transmission modules. Software was compiled by VC 6.0, including control management, signal monitor, state evaluation, fault forecast and maintain assistant decision-making module. The system could be used to monitor some key signals, forecast faults which were likely to be generated, and put forward some maintain assistant projects.
Keywords:State monitor system  Electronic equipment  Fault forecast
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号