| 辽河田杜—84稠油加工方案初探 |
| |
| 引用本文： | 王月霞,刘水.辽河田杜—84稠油加工方案初探[J].石油炼制与化工,2001,32(11):24-27. |
| |
| 作者姓名： | 王月霞 刘水 |
| |
| 作者单位： | 1. 洛阳石化工程公司炼制研究所,洛阳471003
2. 吉林油田炼油厂,松源,138000 |
| |
| 摘 要： | 根据辽河田杜-84稠油密度大、轻馏分少、粘度大、硫含量低的特点，对悬浮床加氢-延迟焦化、ROP工艺-加氢处理-渣油催化裂化、延迟焦化三种加工方案进行了技术经济对比，认为采用延迟焦化方案加工流程短，可得到68.2%的液体产品，汽、柴油经加氢精制后产品性质符合产品规格要求，焦炭可作为普通焦产品出厂。
|
| 关 键 词： | 重质原油 延迟焦化 技术经济 稠油 辽河油田 |
| 修稿时间： | 2001年2月1日 |
DISCUSSION ON PROCESSING SCHEMES OF LIAOHE TIANDU-84 HEAVY CRUDE |
| |
| Wang Yuexia ,Liu Shui.DISCUSSION ON PROCESSING SCHEMES OF LIAOHE TIANDU-84 HEAVY CRUDE[J].Petroleum Processing and Petrochemicals,2001,32(11):24-27. |
| |
| Authors: | Wang Yuexia Liu Shui |
| |
| Affiliation: | Wang Yuexia 1,Liu Shui 2 |
| |
| Abstract: | According to the characteristics of high density, high viscosity, low light fraction yield and low sulfur content of Liaohe Tiandu 84 crude, technical economical comparison of three processing schemes including suspension bed hydrogenation, residue oil pretreatment succeeded with hydrogenation and delayed coking were discussed. It was concluded that delayed coking was the preferable processing route due to its short processing flow and higher liquid yield (68.2%). After hydrofining, its gasoline and diesel products could meet the standards, and the low sulfur coke product could be sold as normal coke. |
| |
| Keywords: | heavy crude delayed coking technical economical comparison |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
