|
|||||
|
|
Fabrication of support structures to prevent SU-8 stiction in high aspect ratio structures |
|
| Authors: | K. D. Vora A. G. Peele B.-Y. Shew E. C. Harvey J. P. Hayes |
| Affiliation: | (1) Department of Physics, La Trobe University, Bundoora, 3086, Australia;(2) Device Technology Group, National Synchrotron Radiation Research Center, 101, Hsin-Ann Rd, 30077 Hsinchu SBI Park, Taiwan;(3) Industrial Research Institute of Swinburne, Swinburne University of Technology, 543-545 Burwood Road, Hawthorn, VIC, 3122, Australia |
| Abstract: | We have previously demonstrated that it is possible to fabricate densely-packed high aspect ratio structures in SU-8 by means of a top-plate support member which stiffens the overall structure and prevents pattern collapse. In this work we have computed the tensile stresses induced in the top-plate structures due to the capillary forces that arise between the columns due to the surface tension of the drying liquid. We have further studied the dynamic behavior of the structure after an instantaneous force. Based on these results, we have shown that the predicted optimal thickness of the top-plate structure is sufficient to maintain structural integrity. |
| Keywords: | Deep X-ray lithography Densely packed high aspect ratio structures Stiction |
| 本文献已被 SpringerLink 等数据库收录！ | |