| 发泡模具射料充填过程的数值模拟 |
| |
| 引用本文： | 姜俊侠,吴志超,叶升平.发泡模具射料充填过程的数值模拟[J].铸造,2005,54(5):479-483. |
| |
| 作者姓名： | 姜俊侠 吴志超 叶升平 |
| |
| 作者单位： | 华中科技大学材料学院,湖北,武汉,430074 |
| |
| 摘 要： | 本文利用商业流体分析软件对多种情况下发泡模具的射料充填过程进行了数值模拟,物理模拟利用数码摄像机记录下射料充填的全过程,数值模拟结果与物理模拟结果对比表明,模拟的结果与实际情况基本上是一致的.
|
| 关 键 词： | 发泡模具 射料充填过程 两相流 数值模拟 |
| 文章编号： | 1001-4977(2005)05-0479-05 |
| 修稿时间： | 2004年7月13日 |
Numerical Simulation to Process of Filling the Foaming Mould |
| |
| JIANG Jun-xia,Wu Zhi-chao,YE Sheng-ping.Numerical Simulation to Process of Filling the Foaming Mould[J].Foundry,2005,54(5):479-483. |
| |
| Authors: | JIANG Jun-xia Wu Zhi-chao YE Sheng-ping |
| |
| Abstract: | The various filling processes of foaming model have been simulated numerically by commercial software of analyzing flow in this paper. And the whole filling process has been recorded with a digital vidicon. The result of contrasting the numerical simulation with that of physical simulation has shown that the flowing trend in the simulation was in good agreement with the practical flow. |
| |
| Keywords: | foaming mould filling process two-phase flow theory numerical simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
