Affiliation: | a Toyota Central Res. & Develop. Labs., Inc., Nagakute, Aichi 480-11, Japan b Toyota Motor Corporation, I, Toyota-cho, Toyota City, Aichi 471, Japan |
Abstract: | During stamping-die design, the formability in sheet-metal forming process has been evaluated by the geometrical functions in ‘Die-Face CAD’, which has been developed and improved by Toyota Motor Corporation. When evaluation by these functions is difficult, formability has been estimated by performing experiments using test dies in which the forming defects are similar to those in the actual process. A numerical method has been developed in order to substitute numerical analysis for experiments using test dies for the accurate prediction of defects in sheet-metal forming. The elastic-plastic FEM with the commercial code ‘JNIKE3D’ has been improved in the areas of: (1) the material constitutive equation; (2) the consideration of the pressure distribution on the blank-holder; and (3) the evaluation of breakage initiation. Using the improved method, the square-cup drawing process and the hemming process have been analyzed. Numerical results for strain, breakage initiation, and hemming deflection were in good agreement with experimental results. The formability of laser-welded blanks and the most efficient process to form them were evaluated also using the improved method. |