首页 | 本学科首页   官方微博 | 高级检索  
     

温度和应变速率对FeCrNi合金位错组态的影响
引用本文:潘晓霞,余勇,陈裕泽,陶俊林,谢若泽.温度和应变速率对FeCrNi合金位错组态的影响[J].钢铁研究学报,2007,19(6):65-0.
作者姓名:潘晓霞  余勇  陈裕泽  陶俊林  谢若泽
作者单位:中国工程物理研究院总体工程研究所,四川,绵阳,621900
摘    要: 利用透射电镜观察了不同温度及不同应变速率下FeCrNi合金的位错组态,分析了位错组态与温度及应变速率的关系。结果表明:温度使交滑移频率提高,位错组态从位错墙向位错胞方向发展,而应变速率升高使交滑移频率降低,位错组态从位错胞向位错墙、高密度层错方向发展。

关 键 词:FeCrNi合金  温度  应变速率  位错组态
文章编号:1001-0963(2007)06-0065-04
收稿时间:1900-01-01;
修稿时间:2007-01-10

Dislocation Configuration of FeCrNi Alloy at Different Temperature and Strain Rate
PAN Xiao-xia,YU Yong,CHEN Yu-ze,TAO Jun-lin,XIE Ruo-ze.Dislocation Configuration of FeCrNi Alloy at Different Temperature and Strain Rate[J].Journal of Iron and Steel Research,2007,19(6):65-0.
Authors:PAN Xiao-xia  YU Yong  CHEN Yu-ze  TAO Jun-lin  XIE Ruo-ze
Affiliation:Institute of System Engineering, China Academy of Engineering Physics, Mianyang 621900, Sichuan, China
Abstract:The dislocation configuration of FeCrNi alloy at different temperature and different strain rate was observed using HITACHI H-700H TEM, and the relationship between dislocation behavior, temperature and strain rate was discussed. The results show that temperature makes the cross slip probability increase, and dislocation configuration evolves from wall to cell. Strain rate makes the cross slip probability decrease, the configuration evolves from cell and wall to high density stacking fault.
Keywords:FeCrNi alloy  temperature  strain rate  dislocation configuration
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《钢铁研究学报》浏览原始摘要信息
点击此处可从《钢铁研究学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号