Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner |
| |
Authors: | Yang Liu Yangbo Deng Junrui Shi Rujie Xiao Houping Li |
| |
Affiliation: | 1.Marine Engineering College, Dalian Maritime University, Dalian 116026, China;2.Naval Architecture and Ocean Engineering College, Dalian Maritime University, Dalian 116026, China;3.School of Transportation and Vehicle Engineering, Shandong University of Technology, Zibo 255049, China |
| |
Abstract: | A simplified two-dimensional model of two-layer porous burner based on pore level is developed.The heat transfer of solid phase in porous burner is seen as the synergistic effects of conduction through con-necting bridges and surface radiation between the solid particles in the model.A numerical simulation study on the characteristics of flow,combustion and heat transfer in the two-layer porous burner is car-ried out using the pore level model,and the effects of the control parameters such as the inlet velocity and solid thermal conductivity on thermal non-equilibrium are investigated.The results show that the flame structure is highly two-dimensional based on pore level.Obvious thermal non-equilibrium in the burner for the two phases and solid phase are observed,the largest temperature difference between the gas and solid phases is observed in combustion zone,while the temperature difference inside the solid particles is largest near the flame front.The results also reveal that thermal non-equilibrium of por-ous burner is much affected by the inlet velocity and solid thermal conductivity. |
| |
Keywords: | Numerical simulation Porous media Thermal non-equilibrium Heat transfer Thermal conductivity |
本文献已被 CNKI 万方数据 等数据库收录! |
| 点击此处可从《中国化学工程学报》浏览原始摘要信息 |
|
点击此处可从《中国化学工程学报》下载全文 |
|