Experimental and numerical simulation of lignite chemical looping gasification with phosphogypsum as oxygen carrier in a fluidized bed |
| |
Authors: | Wang Du Liping Ma Jing Yang Wei Zhang Ran Ao |
| |
Affiliation: | 1. Faculty of Environmental Science and Engineering, Kunming University of Science and Technology, Kunming 650500, China;2. School of Environmental and Municipal Engineering, Xi'an University of Architecture and Technology, Xi'an 710000, China |
| |
Abstract: | Phosphogypsum (PG) is a solid waste produced in the wet process of producing phosphoric acid.Lignite is a kind of promising chemical raw material.However,the high sulfur of lignite limits the utilization of lig-nite as a resource.Based on fluidized bed experiments,the optimal reaction conditions for the production syngas by lignite chemical looping gasification (CLG) with PG as oxygen carrier were studied.The study found that the optimal reaction temperature should not exceed 1123 K;the mole ratio of water vapor to lignite should be about 0.2;the mole ratio of PG oxygen carrier to lignite should be about 0.6.Meanwhile,commercial software Comsol was used to establish a fuel reaction kinetics model.Through computational fluid dynamics (CFD) numerical simulation,the process of reaction in fluidized bed were well captured.The model was based on a two-fluid model and coupled mass transfer,heat transfer and chemical reac-tions.This study showed that the fluidized bed presents a flow structure in which gas and solid coexist.There was a high temperature zone in the middle and lower parts of the fluidized bed.It could be seen from the results of the flow field simulated that the fluidized bed was beneficial to the progress of the gasification reaction. |
| |
Keywords: | Phosphogypsum Lignite Chemical looping gasification Fluidized-bed Syngas Computational fluid dynamics |
本文献已被 万方数据 等数据库收录! |
| 点击此处可从《中国化学工程学报》浏览原始摘要信息 |
|
点击此处可从《中国化学工程学报》下载全文 |
|