首页 | 本学科首页   官方微博 | 高级检索  
     

基于自适应加权融合的标准铜柱鉴选研究
引用本文:张超,孔德仁,贾云飞. 基于自适应加权融合的标准铜柱鉴选研究[J]. 电子测量技术, 2010, 33(7): 58-61
作者姓名:张超  孔德仁  贾云飞
作者单位:南京理工大学机械工程学院精仪系,南京,210094;南京理工大学机械工程学院精仪系,南京,210094;南京理工大学机械工程学院精仪系,南京,210094
摘    要:介绍了标准铜柱在塑性测压校准系统的重要作用及其鉴选方法。为提高测压铜柱受压后变形量测量准确性,提出了用自适应加权融合算法应用于变形量的融合计算,利用所提供的数据融合出标准偏差最小的数据融合值,以3.5×8.75、4×6.5、8×13测压铜柱实测数据为例,比较分析了各型号铜柱采用自适应加权融合算法与平均估算法、贝赛尔公式计算法的有效性和融合精度的差异,从理论和实践两个方面验证了该方法的有效性,提高了融合精度。

关 键 词:测压铜柱  自适加权算法  数据融合

Research on standard copper cylinders' election based on self-adaptive weight
Zhang Chao,Kong Deren,Jia Yunfei. Research on standard copper cylinders' election based on self-adaptive weight[J]. Electronic Measurement Technology, 2010, 33(7): 58-61
Authors:Zhang Chao  Kong Deren  Jia Yunfei
Affiliation:Zhang Chao Kong Deren Jia Yunfei(School of Mechanical Engineering,NJUST,Nanjing 210094)
Abstract:This paper introduces the importance of standard copper cylinders in the plastic pressure-measuring calibration system and the way to elect standard copper cylinders form the general ones.In order to advance accuracy of the pressure-measuring coppers' deformation which were compressed,a data fusion method of self-adaptive weight-estimation is applied to calculate the deformation,use the data which is provided to fuse the data fusion value with the standard deviation of the smallest,by taking3.5×8.75、4×6.5、8×13-copper pressure cylinder for example,compare and analyze the results which get from the self-adaptive weight-estimation algorithm with the average estimation method and Bessel equation method,from the theoretical and practical aspects of the validity of the method are verified,the accuracy of fusion is improved.
Keywords:pressure-measuring copper  self-adaptive weight  data fusion
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号