| 电镀塑料制品对结构设计及成形工艺的要求 |
| |
| 引用本文： | 胡成武. 电镀塑料制品对结构设计及成形工艺的要求[J]. 湖南工业大学学报, 1998, 0(1) |
| |
| 作者姓名： | 胡成武 |
| |
| 作者单位： | 株洲工学院机械系!株洲412008 |
| |
| 摘 要： | 为保证电镀塑料制品的质量，提出了符合电镀要求的塑料制品设计原则，并且指出在注塑成形时，对塑料经过充分干燥，采用较高的注塑温度，较低的注射压力和较慢的注射速度，是使镀层获得良好结合强度的先决条件。
|
| 关 键 词： | 塑料制品电镀 结构设计 注塑成形工艺 镀层结合强度 |
The Effects on Electroplated Plastics by the Plastic Products Desing and the Injection Forming Process |
| |
| Hu Chengwu. The Effects on Electroplated Plastics by the Plastic Products Desing and the Injection Forming Process[J]. Journal of Hnnnan University of Technology, 1998, 0(1) |
| |
| Authors: | Hu Chengwu |
| |
| Abstract: | To ensure the quality of electroplated plastics, he principle for plastics designs is proposed in accordance with the electroplating requirements and injection forming process has an effect on the plating adhexsive strength. |
| |
| Keywords: | Eletroplated plastics plastic products design the injection forming process the plating adhesive strength |
| 本文献已被 CNKI 等数据库收录！ |
