|
|||||
|
|
| PDC钻头焊前焊后处理工艺的试验研究 | |
| 引用本文： | 唐胜利,左平英. PDC钻头焊前焊后处理工艺的试验研究[J]. 探矿工程(岩土钻掘工程), 2004, 31(9): 61-62,60 |
| 作者姓名： | 唐胜利 左平英 |
| 作者单位： | 西安科技大学,地质与环境工程系,陕西,西安,710054 |
| 摘 要： | PDC钻头焊前脱水方式、焊后炉中冷却初温与冷却时间等工艺参数的合理选择是提高PDC钻头焊接强度的基础。通过室内正交实验，研究了上述工艺参数与PDC焊接面抗剪切强度的关系，确定了各工艺参数的优化值。 |
| 关 键 词： | PDC钻头 焊接 抗剪强度 脱水方式 冷却初温 冷却时间 |
| 文章编号： | 1672-7428(2004)09-0061-02 |
| 收稿时间： | 2004-07-04 |
Study on the Treatment Technology before and after Welding of PDC Bit |
|
| TANG Sheng-li and ZUO Ping-ying. Study on the Treatment Technology before and after Welding of PDC Bit[J]. Exploration Engineering （Rock & Soil Drilling and Tunneling）, 2004, 31(9): 61-62,60 | |
| Authors: | TANG Sheng-li and ZUO Ping-ying |
| Abstract: | The treatment technology before and after welding of PDC bit is the main factor which affects the welding strength. Based on a series of indoor experiments, we study the relationship between welding treatment and welding strength in this paper, and obtain optimal welding treatment. |
| Keywords: | PDC Bit welding shear strength dewatering method cool start temperature cool time |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
| 点击此处可从《探矿工程(岩土钻掘工程)》浏览原始摘要信息 | |
| 点击此处可从《探矿工程(岩土钻掘工程)》下载全文 | |