首页 | 本学科首页   官方微博 | 高级检索  
     

Formation and Evolution of Microstructures in Fe–9%Cr Heat-Resistant Steel
基金项目:Acknowledgments This work was financially supported by the National Magnetic Confinement Fusion Program (No. 2011GB108002) and the National Natural Science Foundation of China (No. 51071021).
摘    要:
Microstructures of casting samples of Fe–9%Cr steel and samples subjected to different heat treatments were investigated to determine their formation and evolution mechanism. The results show that there is no macroscopic segregation in the casting Fe–9%Cr steel. During cooling from solidification temperature to room temperature, d-ferrite→austenite transformation is obviously influenced by cooling rate, while subsequent transformation of austenite does not obviously depend on the cooling rate. In the casting samples, a great number of precipitates distribute inside martensitic laths while there are almost no precipitates inside d-ferrite. When the casting samples were reheated to and isothermally held at 800 °C, the original precipitates and the lath boundaries disappeared gradually. Meanwhile, new precipitates nucleate and grow at the prior lath boundaries.

关 键 词:微观结构演变  铁素体  耐热钢  马氏体板条  奥氏体转变  冷却速率  演化机制  宏观偏析

Formation and Evolution of Microstructures in Fe-9%Cr Heat-Resistant Steel
Boling Zhu Shanwu Yang Guangshan Yang Guoliang Liu. Formation and Evolution of Microstructures in Fe-9%Cr Heat-Resistant Steel[J]. Acta Metallurgica Sinica(English Letters), 2014, 0(3): 534-538
Authors:Boling Zhu Shanwu Yang Guangshan Yang Guoliang Liu
Affiliation:School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China
Abstract:
Heat-resistant steel Microstructure Precipitates δ-Ferrite Casting
Keywords:Heat-resistant steel  Microstructure  Precipitates  δ-Ferrite  Casting
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号