|
|||||
|
|
| 板料拉延成形极限理论 | |
| 引用本文： | 王祖唐. 板料拉延成形极限理论[J]. 塑性工程学报, 1996, 3(2): 4-6 |
| 作者姓名： | 王祖唐 |
| 作者单位： | 清华大学 |
| 摘 要： | 提出板料拉延的失稳判据、成形极限曲线可根据拉伸试验数据绘出。计算结果和试验符合良好。 |
| 关 键 词： | 板料成形，成形极限 |
FORMING LIMIT FOR SHEET METALS UNDER TENSILE STRESSES |
|
| Wang Zutang. FORMING LIMIT FOR SHEET METALS UNDER TENSILE STRESSES[J]. Journal of Plasticity Engineering, 1996, 3(2): 4-6 | |
| Authors: | Wang Zutang |
| Abstract: | An instability criterion for sheet metals under tensile stresses was developed. Forming limit curves can be plotted on the base of a tensile test. The calculated results agree very well with experiments. |
| Keywords: | heet metal forming forming limit |
| 本文献已被 CNKI 维普 等数据库收录！ | |