| 环式冷却机卸料曲轨仿真分析 |
| |
| 引用本文： | 陈海鹏,马秋成,谢政,李齐军.环式冷却机卸料曲轨仿真分析[J].机械设计与制造,2007(9):85-87. |
| |
| 作者姓名： | 陈海鹏 马秋成 谢政 李齐军 |
| |
| 作者单位： | 1. 湘潭大学,机械工程学院,湘潭,411105
2. 中国海洋石油总公司深圳分公司,深圳,518031 |
| |
| 摘 要： | 在介绍环式冷却机工作原理的基础上,分析了传统的卸料曲轨曲线设计,并联合UG及ADAMS软件对环式冷却机进行了虚拟仿真,从而证明了曲轨设计的可行性,也为曲轨优化提供了理论依据.
|
| 关 键 词： | ADAMS 虚拟样机 卸料曲轨 环式冷却机 UG 仿真 环式 冷却机 卸料曲轨 仿真分析 mechanism cooling circular skip orbit 理论 优化 曲线设计 虚拟仿真 软件 ADAMS 并联 工作原理 |
| 文章编号： | 1001-3997（2007）09-0085-03 |
| 修稿时间： | 2006-11-23 |
The simulation about the orbit unloaded skip of circular cooling mechanism |
| |
| CHEN Hai-peng,MA Qiu-cheng,XIE Zheng,LI Qi-jun.The simulation about the orbit unloaded skip of circular cooling mechanism[J].Machinery Design & Manufacture,2007(9):85-87. |
| |
| Authors: | CHEN Hai-peng MA Qiu-cheng XIE Zheng LI Qi-jun |
| |
| Affiliation: | 1.School of Mechanical engineering, Xiangtan University, Xiangtan 411105, China;2. China National Offshore Oil Company China Limited Shenzhen Branch, Shenzhen 518031, China |
| |
| Abstract: | The traditional design of the orbit unloaded skip was analyzed after the introduction of circular cooling mechanism's principle of work in this paper, and the virtual simulation was done use UG and ADAMS, thus the feasibility of the unloaded skip design was revealed, and the theoretic foundation was offered for optimizing it. |
| |
| Keywords: | ADAMS Virtual prototype Orbit unloaded skip Circular cooling mechanism UG Simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
