Prediction of pressure required to extrude a wrought magnesium alloy using optimized strain-dependent constitutive parameters |
| |
Authors: | FA Slooff J ZhouJ Duszczyk L Katgerman |
| |
Affiliation: | Department of Materials Science and Technology, Delft University of Technology, Mekelweg 2, 2628 CD, Delft, The Netherlands |
| |
Abstract: | In the present study, the results of uniaxial compression tests were used to predict the pressure required for extruding a wrought magnesium alloy Mg-Al4-Zn1 under different conditions. The breakthrough and steady-state extrusion pressures were calculated using a strain-dependent constitutive equation and verified by laboratory-scale extrusion experiments. A good agreement was achieved between the calculated and measured extrusion pressure at different ram speeds and reduction ratios for different extrudate shapes. A correlation of the peak extrusion pressure with modified reduction ratio and ram speed was established. |
| |
Keywords: | Magnesium Extrusion Wrought alloy Extrusion pressure |
本文献已被 ScienceDirect 等数据库收录! |