| 年产10000 t高锰钢铸件的车间设计 |
| |
| 引用本文： | 杨玉祥.年产10000 t高锰钢铸件的车间设计[J].铸造设备研究,2007(2):24-25,52. |
| |
| 作者姓名： | 杨玉祥 |
| |
| 作者单位： | 机械工业第四设计研究院铸造工程所,河南洛阳471039 |
| |
| 摘 要： | 介绍了年产10000t高锰钢大型锤头的车间设计过程。设计采用2台HX-5电弧炉熔炼、1台LF-15钢包精炼炉精炼，V法造型生产高锰钢大型锤头，配有1套20t／h干砂处理系统，铸件无损探伤采用X光探伤仪，设计采用两班平行工作制年产10000t高锰钢铸件。同时介绍了如何保证钢水质量、造型质量等，分析了V法造型工艺的主要特点，阐述了砂处理的工艺流程。
|
| 关 键 词： | 车间设计 V法造型 高锰钢 |
| 文章编号： | 1004-6178（2007）02-0024-02 |
| 收稿时间： | 2007-02-26 |
| 修稿时间： | 2007-02-26 |
Foundry Planning of Ten Thousand Tons Manganese Steel Casting Capability Per Year |
| |
| YANG Yu-xiang.Foundry Planning of Ten Thousand Tons Manganese Steel Casting Capability Per Year[J].Research Studies On Foundry Equipment,2007(2):24-25,52. |
| |
| Authors: | YANG Yu-xiang |
| |
| Affiliation: | SCIVIC Engineering Corporation Foundry Engineering Department , Luoyang Henan 471039, China |
| |
| Abstract: | A vacuum seal molding line was planned to produce the large manganese steel hammer, with two HX-5 electric are furnaces, one LF - 15 ladle refining furnace, a set of 20t/h dry sand preparation system and X - ray flaw detector for nondestructive inspection of casting, producing ten thousand tons manganese steel casting per year in the double shift parallel working. In this paper how to ensure liquid steel and molding quality was introduced and so on, the vacuum seal molding technology characteristics was analyzed, the sand preparation flow was expatiated. |
| |
| Keywords: | electric arc furnace vacuum seal molding manganese steel |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
