首页 | 本学科首页   官方微博 | 高级检索  
     

循环流化床锅炉SNCR还原剂喷射系统布置方式研究
引用本文:吴迪,张光学,池作和,孙公刚,王进卿.循环流化床锅炉SNCR还原剂喷射系统布置方式研究[J].电站系统工程,2012(5):14-17.
作者姓名:吴迪  张光学  池作和  孙公刚  王进卿
作者单位:中国计量学院
摘    要:循环流化床(CFB)锅炉运行温度在850~1050℃之间,这与选择性非催化还原技术(SNCR)反应温度区间基本重合。流化床锅炉NOx排放量在150~300 mg/m3之间,通过采用SNCR技术,NOx排放水平有望低于国家排放标准100 mg/m3。对一台130 t/h流化床锅炉采用SNCR技术时,喷枪布置方式进行了数值计算,探讨了不同喷枪布置方式下还原剂与烟气混合的程度。

关 键 词:循环流化床锅炉  脱硝  SNCR  布置方式  混合

Study on Injection Arrangement of SNCR Reducing Agent in CFB Boiler
Affiliation:WU Di,ZHANG Guang-xue,CHI Zuo-he,et al.
Abstract:The circulating fluidized bed boiler(CFB) operates within a specific temperature range from 850℃ to 1050℃,and it is just the temperature window within which the NOx reduction reaction occurs by adopting the selective non-catalytic reduction(SNCR) technology.NOx emission of CFB is from 150 mg/m3 to 300 mg/m3,which can be controlled below the national standard of 100 mg/m3 by adopting SNCR technology.An application of SNCR was carried out at a 130t/h CFB boiler.The influence of injection arrangement was analyzed to figure out whether the reducing agent can mix with the flue gas well.
Keywords:CFB  denigration  SNCR  injection arrangement  mixing
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号