|
|||||
|
|
| 基于多Agent的可重构制造系统故障诊断模型 | |
| 引用本文： | 贺鹏,王庆林,刘庆杰. 基于多Agent的可重构制造系统故障诊断模型[J]. 制造业自动化, 2006, 28(11): 11-15 |
| 作者姓名： | 贺鹏 王庆林 刘庆杰 |
| 作者单位： | 北京理工大学,信息科学技术学院,北京,100081 |
| 基金项目： | 国家“973”计划基金项目(2002CB312204) |
| 摘 要： | 可重构制造系统对故障诊断有更高的要求。提出了一种基于多Agent的可重构制造系统故障诊断模型,模型为3层结构,从下向上分别为监测Agent层、诊断Agent层和管理Agent层,分析了模型的故障诊断机理,讨论了模型中Agent间的通信与协作。最后例子表明了可重构制造系统重构前后,该模型均能有效完成故障诊断。 |
| 关 键 词： | 可重构制造系统 故障诊断 多Agent系统 |
| 文章编号： | 1009-0134(2006)11-0011-05 |
| 收稿时间： | 2006-04-16 |
| 修稿时间： | 2006-04-16 |
Fault diagnosis for reconfigurable manufacturing system based on multi-agent system |
|
| HE Peng,WANG Qing-lin,LIU Qing-jie. Fault diagnosis for reconfigurable manufacturing system based on multi-agent system[J]. Manufacturing Automation, 2006, 28(11): 11-15 | |
| Authors: | HE Peng WANG Qing-lin LIU Qing-jie |
| Affiliation: | School of Information Science and TechnoLogy, Beijing Institute of Technology, Beijing 100081, China |
| Abstract: | The reconfigurable manufacturing system(RMS) need better fault diagnosis.Firstly,A fault diagnose model for RMS based on multi-agent system is proposed.The model consists of three levels,that are monitor agent level,diagnosis agent level and manager agent level.The fault diagnosis mechanism of the model is analyzed.Then,the collaboration and communication of the agents in the model is discussed.Finally,an example is used to test the model and the result expresses that the model is feasible before and after reconfiguration. |
| Keywords: | reconfigurable manufacturing system fault diagnosis multi-agent system |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |