首页 | 本学科首页   官方微博 | 高级检索  
     

捣固焦炭内在质量及等反应后强度指标
引用本文:姚怀伟,郑明东,张小勇,吴光友 张献杰.捣固焦炭内在质量及等反应后强度指标[J].钢铁,2013,48(12):16-19.
作者姓名:姚怀伟  郑明东  张小勇  吴光友 张献杰
作者单位:1. 安徽工业大学化学与化工学院, 安徽 马鞍山 243002 2. 安徽省化工设计院, 安徽 合肥 230009
摘    要: 为了研究捣固焦炭对大高炉的适应性,在1050~1200℃使用焦炭连续热反应装置对A类顶装焦、B类捣固焦、C类捣固焦3类焦炭进行等温等反应的溶损反应。当焦炭的失重率分别达到30%,35%,40%时,停止反应,通过I型转鼓检测焦炭的反应后强度。结果表明:捣固处理在一定程度上可以改善焦炭的热态性质;在1100~1150℃时焦炭强度破坏程度最严重;等反应后强度与国家标准CSR存在差异性。

关 键 词:焦炭  等反应    反应后强度  
收稿时间:2013-03-27

Stamping Coke Quality and Coke Strength After Uniformreaction Index
YAO Huai-wei,ZHENG Ming-dong,ZHANG Xiao-yong,WU Guang-you,ZHANG Xian-jie.Stamping Coke Quality and Coke Strength After Uniformreaction Index[J].Iron & Steel,2013,48(12):16-19.
Authors:YAO Huai-wei  ZHENG Ming-dong  ZHANG Xiao-yong  WU Guang-you  ZHANG Xian-jie
Affiliation:1. Chemistry and Chemical Engineering Institute,Anhui University of Technology, Ma’anshan 243002, Anhui, China 2.Anhui Province Chemical Industry Design Institute, Hefei 230009, Anhui, China
Abstract:In order to study the stamping coke on the adaptability for large capacity blast furnace, three kinds of coke, such as A coke, B tamping coke and C tamping coke, were used for solution loss reaction experiment at 1050-1200℃, and the test was stopped at a weight loss of 30%, 35% and 40%, and the strength of coke was tested by I type drum. The results show that the hot properties of coke can be improved to a certain extent through tamping treatment. The coke strength will get the worst at 1100-1150℃. And there are some difference between coke strength after uniform reaction and standard CSR.
Keywords:coke  uniform reaction  coke strength after reaction    
点击此处可从《钢铁》浏览原始摘要信息
点击此处可从《钢铁》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号