Hybrid epoxy-silyl modified polymer adhesives for CFRP sheets bonded to a steel substrate

This paper presents an experimental study examining the interfacial behavior between a steel substrate and carbon fiber reinforced polymer (CFRP) sheets bonded with hybrid epoxy-silyl modified polymer (SMP) adhesives. The epoxy adhesive has high modulus and strength characteristics, while the SMP adhesive possesses a low modulus with permanent elastic nature. The hypothesis tested is that a combination of these two distinct materials can alleviate interfacial stresses along the bond line with maintaining adequate strength. Two types of double-lap tension tests are conducted to evaluate the bond-capacity of the epoxy and SMP adhesives and to study the effect of various hybrid bond schemes. Test results show that the specimens bonded with homogeneous epoxy demonstrate abrupt failure, whereas those with SMP exhibit gradual load-softening at failure. The load-carrying capacity and stiffness of the CFRP–steel interface are not influenced by hybrid bond configurations. The degree of CFRP-debonding is, however, affected by the hybrid bond scheme. Stress transfer from the steel substrate to the CFRP is well maintained along the hybrid bond line with significant local deformability of the interface layer. Analytical models report that shear stresses along the CFRP–steel interface are noticeably mitigated at geometric discontinuities and the proposed hybrid bond technique can be used for structure-level application.