| ZL201曲面薄壁件挤压铸造工艺及模具设计 |
| |
| 引用本文： | 吕野楠,王家宣,熊洪淼,李春,胡德锋.ZL201曲面薄壁件挤压铸造工艺及模具设计[J].特种铸造及有色合金,2005,25(3):153-154. |
| |
| 作者姓名： | 吕野楠 王家宣 熊洪淼 李春 胡德锋 |
| |
| 作者单位： | 南昌航空工业学院 |
| |
| 摘 要： | 根据厂家提出的要求、结合帽盖零件产品结构特点和加工难度,确定了用ZL201合金挤压铸造成形工艺制坯,替代LY12合金棒料生产曲面薄壁帽盖零件,设计并制造了两套帽盖零件毛坯挤压铸造模具.两套模具的区别主要在凹模部分,其中一套属于间接加压,凹模带有溢料槽,另一套属于直接加压,凹模为组合式.
|
| 关 键 词： | ZL201合金 挤压铸造 模具设计 |
| 文章编号： | 1001-2249(2005)03-0153-02 |
| 修稿时间： | 2004年12月27 |
Thin-walled parts with Curving Surface of XL201 Alloy in Squeezing Casting and Its Die Design |
| |
| Lü Yenan,Wang Jiaxuan,Xiong Hongmiao,Li Chun,Hu Defeng.Thin-walled parts with Curving Surface of XL201 Alloy in Squeezing Casting and Its Die Design[J].Special Casting & Nonferrous Alloys,2005,25(3):153-154. |
| |
| Authors: | Lü Yenan Wang Jiaxuan Xiong Hongmiao Li Chun Hu Defeng |
| |
| Abstract: | Thin-walled cover parts with curving surface of ZL201 alloy instead of LY12 alloy were manufactured by squeezing casting based on the factory's requirements in accordance with the structure characteristics and manufacturing difficulties of the parts.Two sets of moulds for cover parts in squeezing casting were designed and manufactured.The characteristics of the moulds were compared and the squeezing casting technologies were discussed,which provided a basis for the production of qualified cover parts. |
| |
| Keywords: | ZL201 Alloy Squeezing Casting Mould Design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
