| 环氧树脂板化学镀镍工艺研究 |
| |
| 引用本文： | 刘俊峰,胡弃疾,彭良富.环氧树脂板化学镀镍工艺研究[J].广州化工,2011,39(5):94-96. |
| |
| 作者姓名： | 刘俊峰 胡弃疾 彭良富 |
| |
| 作者单位： | 1. 湖南科技大学,湖南,湘潭,411201
2. 湖南三一重工有限公司,湖南,长沙,410005 |
| |
| 摘 要： | 对环氧树脂板进行预处理后,通过单因素实验研究了化学镀镍工艺。以基本配方为基础,优化基本配方,并研究溶液各组分及工艺条件对镀液和镀层的影响,得到最佳工艺条件：NiSO4.6H2O（25 g/L）、NaH2PO2.H2O（30 g/L）、C6H5Na3O7.2H2O（30 g/L）、Na4P2O7.10H2O（10 g/L）、NH4Cl（30 g/L）、稳定剂（4 mg/L）、pH=9.0、T=40℃,机械搅拌。该配方镀速快,镀液稳定,镀层性能良好。
|
| 关 键 词： | 化学镀镍 络合剂 柠檬酸钠 焦磷酸钠 三乙醇胺 |
Nickel Electroless Plating of Epoxy Resin Board |
| |
| LIU Jun-feng,HU Qi-ji,PENG Liang-fu.Nickel Electroless Plating of Epoxy Resin Board[J].GuangZhou Chemical Industry and Technology,2011,39(5):94-96. |
| |
| Authors: | LIU Jun-feng HU Qi-ji PENG Liang-fu |
| |
| Affiliation: | 1 Hunan University of Science and Technology,Hunan Xiangtan 411201;2 Hunan Branch,Sany Group, Hunan Changsha 410005,China) |
| |
| Abstract: | Through one-factor experimental design,electroless nickel plating was studied after pretreatment.The study based on the general formula,optimized,and the impact of components and processing conditions on performance of nickel solution and coating was studied too.Optimal Conditions for nickel electroplating process were NiSO4·6H2O(25 g/L),NaH2PO2·H2O(30 g/L),C6H5Na3O7·2H2O(30 g/L),Na4P2O7·10H2O(10 g/L),NH4Cl(30 g/L),stabilizer(4 mg/L),pH=9.0,T=40 ℃,and air blast.This formula had a fast plating rate,the solution was stable,and had a homogeneous coating. |
| |
| Keywords: | nickel electroless complexing agent sodium citrate sodium pyrophosphate triethanolamine |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
