首页 | 本学科首页   官方微博 | 高级检索  
     

RHCM成型高光制品的结构设计技术
引用本文:刘东雷,辛勇. RHCM成型高光制品的结构设计技术[J]. 高分子材料科学与工程, 2009, 0(8)
作者姓名:刘东雷  辛勇
作者单位:南昌大学机电工程学院;
基金项目:江西省自然科学基金资助项目(0750056)
摘    要:根据快速冷热成型(RHCM)对制品结构设计的基本要求,结合普通制品结构设计一般原则,研究了高光注塑制品的主体结构及其筋、凸起、孔、圆角等类型结构的基本设计技术,得出了高光注塑制品结构设计需要同时满足壁厚均匀性与结构协调性两个主要准则,并以音箱前面壳和液晶显示器(LCD)电视机前壳为例进行了设计研究,为高光制品结构设计提供了理论上的指导。

关 键 词:快速冷热成型  高光制品  结构设计  

Structure Design Technique of High-Gloss Surface Plastic Parts Processed by Rapid Heat Cycle Molding Technology
LIU Dong-lei,XIN Yong. Structure Design Technique of High-Gloss Surface Plastic Parts Processed by Rapid Heat Cycle Molding Technology[J]. Polymer Materials Science & Engineering, 2009, 0(8)
Authors:LIU Dong-lei  XIN Yong
Affiliation:LIU Dong-lei,XIN Yong(Department of Mechanical and Electrical Engineering,Nanchang University,Nanchang 330031,China)
Abstract:According to the essential requirements of structure design with high-gloss surface plastic parts manufactured by rapid heat cycle molding(RHCM) technology,the design technique of structure of high-gloss surface parts including main structure,ribs,bosses,holes,fillets etc has been discussed based on conventional design rules.The research finds that two primary rules,uniformity of wall-thickness and correspondence of structure,shall be obeyed during the whole course of design phase.Two cases,front panel of s...
Keywords:rapid heat cycling molding  high-gloss surface plastic parts  structure design  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号