The influence of tillage and cropping-intensity on cereal response to nitrogen,sulfur, and phosphorus

Efficient fertilizer use is a prerequisite for achieving optimum crop yield while avoiding environmental contamination. Cereal response to nitrogen (N), sulfur (S), and phosphorus (P) were determined for 6 years under differing tillage conventional-till (CT) vs. no-till (NT)] and intensity of cropping (cereal/fallow vs. cereal/cereal). Semidwarf white winter wheat (Triticum aestivum L.) alternated yearly with either fallow or spring cereal barley (Hordeum vulgare L.) or spring wheat] on a Typic Haploxeroll soil in a 415 mm rainfall zone. Fertilizer treatments were no fertilizer (None), N only (N), N plus S (NS), and N plus S plus P (NSP). Average application rate, when applied, was 109 kg N, 18 kg S, and 11 kg P ha^–1. Average cereal yield without fertilizer was 1.82 t ha^–1. Nitrogen increased grain yield in 6 of 6, S in 4 of 6, and P in 3 of 6 years, with P and S response significant the remaining years at the 10% probability level. Average yield increases were 1.11 t ha^–1 for N, 0.93 t ha^–1 for S, and 0.47 t ha^–1 for P. The NT/CT yield ratio was 0.60, 0.75, 0.93, and 0.95 with None, N, NS, and NSP addition, respectively, indicating that N and S deficiency were more severe in no-till. Limited increase in the NT/CT ratio with P addition indicated that P deficiency was less affected by tillage. Winter wheat always yielded less under NT than CT regardless of fertility, whereas spring cereals reached equality when fertilized with NSP. Annually-cropped wheat yielded 52, 67, 89, and 90% of wheat after fallow with None, N, NS, and NSP, respectively. Thus N and S, but not P, deficiency was more intense with increased frequency of cropping. Adequate fertility was a prime prerequisite for efficient yield in all systems.