| 反应烧结法制备(AlN,TiN)-Al2O3复合材料的研究 |
| |
| 引用本文： | 龚红宇,尹衍升,李爱菊,刘英才,甄玉花,李春胜.反应烧结法制备(AlN,TiN)-Al2O3复合材料的研究[J].复合材料学报,2003,20(1):12-15. |
| |
| 作者姓名： | 龚红宇 尹衍升 李爱菊 刘英才 甄玉花 李春胜 |
| |
| 作者单位： | 山东大学,材料液态结构及其遗传性教育部重点实验室,济南,250061 |
| |
| 基金项目： | 国家自然科学基金，山东省自然科学基金，50242008，Y2001F01，， |
| |
| 摘 要： | 以Ti,Al,Al2O3为初始粉料,通过750~800℃氮气保护下的中温焙烧,然后在1420~1550℃在氮气氛下反应烧结,制备了不同配比的(AlN,TiN)-Al2O3复合材料。研究了组成及烧结工艺对复合材料力学性能、显微结构等的影响。用XRD,SEM等方法分析粉体及烧结体的相组成及微观结构。分析结果表明:AlN,TiN的形成,有助于材料的致密化并使其力学性能提高。组成为20wt%(Al,Ti)-Al2O3的粉体在1520℃、30MPa、保温、保压30min热压烧结条件下,与N2气反应可得到硬度(HRA)为 94.1的高硬度的(AlN,TiN)-Al2O3复合材料,该材料的抗弯强度为687 MPa,断裂韧性(KIC)为6.5MPa·m1/2。
|
| 关 键 词： | TiN AlN Al2O3 复合材料 反应烧结 |
| 文章编号： | 1000-3851(2003)01-0012-04 |
| 收稿时间： | 2001-07-13 |
| 修稿时间： | 2001年7月13日 |
REACTION SINTERING FABRICATION OF (AlN,TiN)-AL2O3 COMPOSITE |
| |
| GONG Hongyu,YIN Yansheng,LI Aiju,LIU Yingcai,ZHEN Yuhua,LI Chunsheng.REACTION SINTERING FABRICATION OF (AlN,TiN)-AL2O3 COMPOSITE[J].Acta Materiae Compositae Sinica,2003,20(1):12-15. |
| |
| Authors: | GONG Hongyu YIN Yansheng LI Aiju LIU Yingcai ZHEN Yuhua LI Chunsheng |
| |
| Affiliation: | Key Laboratory of Liquid Structure and Heredity of Material of Education Ministry, Shandong Univesity, Jinan 250061 |
| |
| Abstract: | The (AlN,TiN)-Al2O3 composites were fabricated by reaction sintering (Al,Ti)-Al2O3 powder mixtures with nitrogen at 750~800℃ and sintering 1420~1550℃ in nitrogen. The effect of powder contents and sintering process on mechanical properties, phases composites and microstructures of composites was researched by some methods such as XRD and SEM. The experimental results show that the formation of AlN and TiN aids to compact composites and increases their mechanical properties. Reaction sintering 20wt%(Al,Ti)-Al2O3 powder with nitrogen in 1520℃, 30MPa, holding 30min, could receive (AlN,TiN)-Al2O3 composites, which possess hardness HRA up to 94.1, bending strength 687MPa, and fracture toughness 6.5MPa·m-1/2. |
| |
| Keywords: | TiN AlN Al_2O_3 composite reactive sintering |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《复合材料学报》浏览原始摘要信息 |
|
点击此处可从《复合材料学报》下载全文 |
|
