首页 | 本学科首页   官方微博 | 高级检索  
     

硬件在环试验台整车状态跟随控制系统设计
引用本文:李静,王子涵,余春贤,韩佐悦,孙博华.硬件在环试验台整车状态跟随控制系统设计[J].吉林大学学报(工学版),2013,43(3):577-583.
作者姓名:李静  王子涵  余春贤  韩佐悦  孙博华
作者单位:吉林大学汽车仿真与控制国家重点实验室,长春,130022
基金项目:长江学者和创新团队发展计划项目,新世纪优秀人才支持计划项目,国家自然科学基金项目
摘    要:为了实现用试验台模拟实车运动信号,在分析整车运动状态模拟装置工作原理的基础上,以汽车运动信号及其变化率为控制参数,设计了主环有限状态机控制器和伺服环电机控制系统,并安装在已搭建的硬件在环试验台上。在该硬件在环试验台上进行了典型工况台架试验,将安装于该试验台上的传感器采集的实际信号与目标信号进行了对比,结果表明了所设计的控制系统跟随控制效果的有效性。

关 键 词:车辆工程  硬件在环试验台  车辆状态跟随  有限状态机  电机控制系统

Design of control system to follow vehicle state with HIL test beach
LI Jing,WANG Zi-han,YU Chun-xian,HAN Zuo-yue,SUN Bo-hua.Design of control system to follow vehicle state with HIL test beach[J].Journal of Jilin University:Eng and Technol Ed,2013,43(3):577-583.
Authors:LI Jing  WANG Zi-han  YU Chun-xian  HAN Zuo-yue  SUN Bo-hua
Affiliation:(State Key Laboratory of Automotive Simulation and Control,Jilin University,Changchun 130022,China)
Abstract:To realize the simulation of vehicle motions,a Hardware-in-the-Loop(HIL) test bench was constructed.The working principle of the simulation of vehicle motion signal was analyzed based on the constructed HIL test bench.A main loop controller with Finite State Machine(FSM) and servo loop control system of motor was designed.In order to prove the efficiency of the HIL test bench and FSM control algorithm,experiments with typical working condition was carried out.The signals collected from the sensors installed on the test bench were compared with target signals,and the results demonstrate effectiveness of designed control system in following the vehicle state.
Keywords:vehicle engineering  hardware-in-the-loop test bench  state following for vehicle  finite state machine  motor control system
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号