| 激光相变硬化在Cr12汽车模具材料表面强化中的应用研究 |
| |
| 引用本文： | 周健,温宗胤,李新华.激光相变硬化在Cr12汽车模具材料表面强化中的应用研究[J].模具工业,2007,33(4):67-70. |
| |
| 作者姓名： | 周健 温宗胤 李新华 |
| |
| 作者单位： | 1. 中南林业科技大学,机电学院,湖南,长沙,410004
2. 广西工学院,机械工程系,广西,柳州,545006 |
| |
| 摘 要： | 利用不同的激光工艺参数对汽车模具Cr12材料表面进行激光相变硬化试验,探讨了激光工艺参数对激光相变硬化层深度的影响,研究了横向和沿深度方向显微硬度的分布情况以及硬化层的组织结构的变化。研究结果表明,采取适当的工艺措施,表面硬度在不同程度上都得到了提高,同时可以消除表面裂纹,从而成倍地提高了汽车模具的使用寿命。
|
| 关 键 词： | 激光相变硬化 模具 激光参数 |
| 文章编号： | 1001-2168(2007)04-0067-04 |
| 修稿时间： | 10 9 2006 12:00AM |
Application of laser transformation hardening in surface strengthening of automotive die steel Cr12 |
| |
| ZHOU Jian,WEN Zong-yin,LI Xing-hua.Application of laser transformation hardening in surface strengthening of automotive die steel Cr12[J].Die & Mould Industry,2007,33(4):67-70. |
| |
| Authors: | ZHOU Jian WEN Zong-yin LI Xing-hua |
| |
| Affiliation: | 1. School of Mechanical and Electrical Engineering, Central South University of Forestry and Technology, Changsha, Hunan 410004, China; 2. Department of Mechanical Engineering, Guangxi Institute of Technology, Liuzhou, Guangxi 545006, China |
| |
| Abstract: | Experiment was made with various laser technological parameters for the surface transformation hardening of automotive die steel Cr12.The effects of the parameters on the depth of hardened layer were researched.The distribution of microhardness along sidewise and depthwise,and variation of metallographic structure of hardened layer were investigated.The study shows that appropriate technique will increase the hardness of various die surfaces to different extent, eliminate the surface cracking,thus greatly extend the service life of automotive dies. |
| |
| Keywords: | laser transformation hardening die laser parameter |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
