| 基于ADAMS和MATLAB的空气弹簧虚拟样机运动仿真 |
| |
| 引用本文： | 李纯,丁旺才.基于ADAMS和MATLAB的空气弹簧虚拟样机运动仿真[J].机械工程师,2011(10):34-36. |
| |
| 作者姓名： | 李纯 丁旺才 |
| |
| 作者单位： | 兰州交通大学机电工程学院,兰州,730070 |
| |
| 摘 要： | 文中在分析空气弹簧工作原理的基础上,建立了ADAMS虚拟样机模型,并采用PID控制系统模拟高度控制阀,得到了空气弹簧高度响应曲线。结果表明,通过ADAMS与MATLAB/Simulink联合仿真,实现了对空气弹簧不同工况下运动状态的模拟,体现了高度控制阀延时性与无感区的特性。
|
| 关 键 词： | 空气弹簧 虚拟样机 ADAMS MATLAB/Simulink |
Kinematics Simulation and Virtual Prototype of Air Spring Based on ADAMS and MATLAB |
| |
| LI Chun,DING Wang-Cai.Kinematics Simulation and Virtual Prototype of Air Spring Based on ADAMS and MATLAB[J].Mechanical Engineer,2011(10):34-36. |
| |
| Authors: | LI Chun DING Wang-Cai |
| |
| Affiliation: | LI Chun,DING Wang-cai(School of Mechanical Engineering,Lanzhou Jiaotong University,Lanzhou 730070,China) |
| |
| Abstract: | Based on the analysis of the basic principle of air spring,it builds the virtual prototyping model in ADAMS,and simulates the height control valve using PID controller.Finally the displacement response curve of air spring is obtained.The results show that the motion states of air spring are imitated in different conditions through Co-simulation of ADAMS and MATLAB/Simulink,and the characteristics of delay and no-response region are reflected from the model of height control valve. |
| |
| Keywords: | air spring virtual prototyping ADAMS MATLAB/Simulink |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
