Stress- and strain-induced formation of martensite and its effects on strength and ductility of metastable austenitic stainless steels

The effects of deformation-induced formation of martensite have been studied in metastable austenitic stainless steels. The stability of the austenite, being the critical factor in the formation of martensite, was controlled principally by varying the amounts of carbon and manganese. The formation of martensite was also affected by different test and rolling temperatures, rolling time, and various reductions in thickness. The terms “stress-induced” and “strain-induced” formation of martensite are defined. Experimental results show that low austenite stability resulted in stress-induced formation of martensite, high work-hardening rates, high tensile strengths, low “yield strengths,” and low elongation values. When the austenite was stable, plastic deformation was initiated by slip, and the work-hardening rate was too low to prevent early necking. A specific amount of strain-induced martensite led to an “optimum” work-hardening rate, resulting in high strengthand high ductility. For best results processing should be carried out aboveM _d and testing betweenM _d andM _s. Mechanical working aboveM _d had a negligible effect on the yield strength betweenM _d andM _s when the austenite stability was low, but its effect increased as the austenite became, more stable. Serrations appeared in the stress-strain curve when martensite was strain induced.