|
|||||
|
|
| 轮辐压型生产工艺过程及质量控制 | |
| 引用本文： | 魏同林,谢敏,徐家良,刘洁净,毕泗元,胡劲松. 轮辐压型生产工艺过程及质量控制[J]. 新技术新工艺, 2013, 0(7): 111-112 |
| 作者姓名： | 魏同林 谢敏 徐家良 刘洁净 毕泗元 胡劲松 |
| 作者单位： | 1. 哈尔滨第一机械集团,黑龙江哈尔滨,150056 2. 北京北方车辆集团有限公司,北京,100072 3. 内蒙古北方重工业集团有限公司,内蒙古包头,014033 |
| 摘 要： | 分析了轮辐压型件的缺陷，采取严格控制加热，合理配置第3道压型模凸凹模间隙，合理使用润滑剂等有效措施，解决了轮辐压型件的工艺难点。总结出了生产轮辐压型件的合理工艺操作方法，提高了轮辐压型件的生产效率和压型质量，合格率由以往的约70％提高到了当前的接近100％。 |
| 关 键 词： | 轮辐 工艺 质量 |
Producing Process Procedure of Spoke Squeezing |
|
| WEI Tonglin , XIE Min , XU Jialiang , LIU Jiejing , BI Siyuan , HU Jinsong. Producing Process Procedure of Spoke Squeezing[J]. New Technology & New Process, 2013, 0(7): 111-112 | |
| Authors: | WEI Tonglin XIE Min XU Jialiang LIU Jiejing BI Siyuan HU Jinsong |
| Affiliation: | 3 (1. Harbin First MaehineryC-roup, Harbin 150056 ,China;2. Beijing North Venicle Group Co. ,Ltd,Beijing 100072,China; 3. Inner Mongolia North Heavy Industries Group Corporation Limited,Baotou 014033,China) |
| Abstract: | The defects of spoke squeezing piece was analyzed, strict heating control, reasonable setting space of the third squeezing die punch-die, reasonable using lubricant and so on were taken to solved difficult when making spoke squee- zing pieces. Operation way was concluded, which can improve the efficiency and quality of spoke squeezing pieces, the per- cent of pass has been improved from 70% to 100%. |
| Keywords: | spoke technology quality |
| 本文献已被 维普 万方数据 等数据库收录！ | |