| 船用热轧钢板焊接性能研究 |
| |
| 引用本文： | 宋立秋,罗守斌,郭爱林. 船用热轧钢板焊接性能研究[J]. 钢铁钒钛, 2001, 22(2): 25-32 |
| |
| 作者姓名： | 宋立秋 罗守斌 郭爱林 |
| |
| 作者单位： | 攀枝花钢铁研究院,;攀钢钢城企业总公司,;攀钢轨梁厂, |
| |
| 摘 要： | 建立了热轧钢板焊接热影响区（HAZ）的连续冷却转变曲线（焊接CCT曲线）,以研究船用热轧钢板的焊接性能。根据所建立的焊接CCT曲线,选择了合理的焊接工艺对10mm厚的船用热轧钢板进行了手工电弧焊,并对焊后的焊接接头进行了宏观检验和X射线探伤、力学性能试验及冲击试验。借助金相显微镜和扫描电镜分析了CCT图中不同冷速条件下的显微组织和焊接接头的显微组织以及冲击断口形貌。试验结果表明：根据建立的焊接CCT曲线,所选择的手工电弧焊的焊接工艺是合理的,焊缝质量良好,焊接接头具有良好的综合性能。
|
| 关 键 词： | 焊接CCT曲线 手工电弧焊 焊接工艺 力学性能 冲击断口 |
| 文章编号： | 1004-7638(2001)02-0025-08 |
| 修稿时间： | 2001-02-12 |
RESEARCH ON THE WELDING PROPERTIES OF HOT ROLLED SHIP PLATE |
| |
| SONG Li-qiu ,LUO Shou-bin ,GUO Ai-lin [BHDWGmm,WK,WKZQ,WKW]. RESEARCH ON THE WELDING PROPERTIES OF HOT ROLLED SHIP PLATE[J]. Iron Steel Vanadium Titanium, 2001, 22(2): 25-32 |
| |
| Authors: | SONG Li-qiu LUO Shou-bin GUO Ai-lin [BHDWGmm WK WKZQ WKW] |
| |
| Affiliation: | SONG Li-qiu 1,LUO Shou-bin 2,GUO Ai-lin 3[BHDWG10mm,WK2,WK42ZQ0,WK2W] |
| |
| Abstract: | Continuous cooling transformation diagrams (Welding CCT diagrams) of hot-affect zone in hot rolled steel plate were developed to investigate the welding properties of hot rolled shipbuilding plate.According to them,the reasonable welding technique was selected to weld hot-rolled shipbuilding plate (10mm thick) through manual arc welding and welding joints after the welding process were measured by visual examination,X-ray inspection,mechanical property and impact tests.Microstructure at different cooling rates on CCT diagram,microstructures in welded joints and impact fracture morphologies were analyzed by means of metalloscope and scanning electron microscope.As a result,it is indicated that the manual arc welding technique is reasonable since good quality of welding seam and excellent complex properties in welded joint. |
| |
| Keywords: | CCT welding diagram manual arc welding welding process mechanical property impact fracture |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
