| 小组分对热固性浇注 PBX 性能的影响? |
| |
| 引用本文： | 李昆,焦建设,陈春燕,高立龙,南海,李巍. 小组分对热固性浇注 PBX 性能的影响?[J]. 爆破器材, 2016, 0(1): 26-29. DOI: 10.3969/j.issn.1001-8352.2016.01.006 |
| |
| 作者姓名： | 李昆 焦建设 陈春燕 高立龙 南海 李巍 |
| |
| 作者单位： | 西安近代化学研究所 陕西西安,710065;总装炮兵防空兵装备技术研究所 北京,100012 |
| |
| 摘 要： | 通过对比热固性浇注PBX的渗油性、力学强度,探讨了配方中增塑剂、固化剂、键合剂等小组分对热固性浇注PBX炸药性能的影响。试验结果表明:增塑比增加,渗油率增加,试样力学强度降低;固化参数减小,力学强度降低,在固化参数小于0.8时渗油率明显增加;外加0.3%(质量分数)的键合剂可改善试样渗油率,并可明显增加试样力学强度,减少颗粒脱黏。
|
| 关 键 词： | 浇注PBX 力学性能 渗油性 小组分 |
Effect of Minor Components on the Properties of Cast Plastic Bonded Explosives |
| |
| LI Kun,JIAO Jianshe,CHEN Chunyan,GAO Lilong,NAN Hai,LI Wei. Effect of Minor Components on the Properties of Cast Plastic Bonded Explosives[J]. Explosive Materials, 2016, 0(1): 26-29. DOI: 10.3969/j.issn.1001-8352.2016.01.006 |
| |
| Authors: | LI Kun JIAO Jianshe CHEN Chunyan GAO Lilong NAN Hai LI Wei |
| |
| Abstract: | The minor components, including plasticizer, curing agent and bonding agent, that affected the properties of cast plastic bonded explosives (PBX) were studied by comparing the exudation and mechanical property. The results show that the exudation ratio increases with the increase of plasticizer, but the mechanical intensity decreases. The mechan-ical intensity also decreases as the increase of curing agents, and the exudation ratio increases obviously when the curing rate is less than 0. 8. The addition of 0. 3% bonding agents could improve the exudation property, increased the mechanical intensity obviously, and reduce debonding of particles. |
| |
| Keywords: | cast PBX mechanical property exudation minor components |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
