| 基于moldflow相机外壳注塑成型优化设计 |
| |
| 引用本文： | 韩雷雷,张惠敏.基于moldflow相机外壳注塑成型优化设计[J].塑料制造,2014(9):84-89. |
| |
| 作者姓名： | 韩雷雷 张惠敏 |
| |
| 作者单位： | 青岛科技大学,山东青岛266061 |
| |
| 摘 要： | 以缩短产品生产周期，降低成本及提高产品质量为目的，利用moldflow／MPI对相机外壳成型过程进行了模拟分：析。根据模拟分析得到熔接痕、流动前沿温度、体积收缩率和翘曲等结果，优化浇口设计及成型方案。分析结果对塑件注射成型应用具有指导作用。
|
| 关 键 词： | moldfloW 翘曲变形 优化设计 |
Optimization Design of Camera Shell Injection Molding Based on Moldflow |
| |
| Hart Leilei,Zhang Huimin.Optimization Design of Camera Shell Injection Molding Based on Moldflow[J].Plastics Manufacture,2014(9):84-89. |
| |
| Authors: | Hart Leilei Zhang Huimin |
| |
| Affiliation: | (Qingdao University of Science and Technology,Qingdao Shandong,266061) |
| |
| Abstract: | To short the production period, reduce cost and rais products quality. The camera shell is made injection molding simulation analysis by using Moldflow/MPI technology.According to the results of the simulation analysis of weld mark,temperature at flow front,volumetric shrinkage ,warpage and so on, the design of gate and molding project are optimized. The analysis results had a guide to the injection molding processes of plastic. |
| |
| Keywords: | Moldflow warpage distortion optimization design |
| 本文献已被 维普 等数据库收录！ |
|
