A 10-Gb/s receiver with series equalizer and on-chip ISI monitor in 0.11-/spl mu/m CMOS

A 10-Gb/s receiver is presented that consists of an equalizer, an intersymbol interference (ISI) monitor, and a clock and data recovery (CDR) unit. The equalizer uses the Cherry-Hooper topology to achieve high-bandwidth with small area and low power consumption, without using on-chip inductors. The ISI monitor measures the channel response including the wire and the equalizer on the fly by calculating the correlation between the error in the input signal and the past decision data. A switched capacitor correlator enables a compact and low power implementation of the ISI monitor. The receiver test chip was fabricated by using a standard 0.11-/spl mu/m CMOS technology. The receiver active area is 0.8 mm/sup 2/ and it consumes 133 mW with a 1.2-V power supply. The equalizer compensates for high-frequency losses ranging from 0 dB to 20 dB with a bit error rate of less than 10/sup -12/. The areas and power consumptions are 47 /spl mu/m /spl times/ 85 /spl mu/m and 13.2 mW for the equalizer, and 145 /spl mu/m /spl times/ 80 /spl mu/m and 10 mW for the ISI monitor.