首页 | 本学科首页   官方微博 | 高级检索  
     

超增溶自组装原位合成ZSM-5纳米分子筛
引用本文:张新,王鼎聪,李萍,赵杉林.超增溶自组装原位合成ZSM-5纳米分子筛[J].工业催化,2008,16(12):43.
作者姓名:张新  王鼎聪  李萍  赵杉林
作者单位:1.辽宁石油化工大学, 辽宁 抚顺 113001; 2.中国石化抚顺石油化工研究院, 辽宁 抚顺 113001
摘    要:采用超增溶胶团法制备纳米ZSM-5分子筛。考察体系水含量、乳化剂用量、晶化温度和焙烧温度等因素对合成分子筛产品的粒径、晶体形貌、孔径、孔容和比表面积等的影响,并采用BET、XRD和TEM等手段对其进行表征。结果表明,制备纳米ZSM-5分子筛的最佳条件:n(H2O)∶n(SiO2)=90,乳化剂(RHP)质量分数为10%,晶化温度180 ℃,焙烧温度500 ℃。制得的粒子平均粒径(50~70) nm,大多数粒子为球形,粒径分布较窄,呈单分散且微粒不易团聚。

关 键 词:催化化学  超增溶胶团  纳米分子筛  表面活性剂  原位合成  

In-situ synthesis of ZSM-5 nanoparticle zeolite via supersolubility micelles
ZHANG Xin,WANG Dingcong,LI Ping,ZHAO Shanlin.In-situ synthesis of ZSM-5 nanoparticle zeolite via supersolubility micelles[J].Industrial Catalysis,2008,16(12):43.
Authors:ZHANG Xin  WANG Dingcong  LI Ping  ZHAO Shanlin
Affiliation:1.Liaoning Shihua University, Fushun 113001, Liaoning, China; 2.Sinopec Fushun Research Institute of Petroleum and Petrochemicals, Fushun 113001, Liaoning, China
Abstract:ZSM-5 zeolites were synthesized by in-situ synthesis of supersolubility micelles. Influence of water and surfactant content, crystalization temperature and calcination temperature on the particle size, pore size, pore volume, surface area and crystal morphology was investigated by BET, XRD and TEM. The optimal synthesis condition for ZSM-5 zeolite was obtained as follows: water-to-silica molar ratio 90, mass percentage of surfactant=10%, crystallization temperature 180 ℃,calcination temperature 500 ℃. The product prepared had average particle size of (50-70) nm, spherical appearance and narrow particle size distribution, with single layer dispersion of the particles.
Keywords:supersolubility micelle  nanoparticle zeolite  surfactant  in-situ synthesis  catalytic chemistry  
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《工业催化》浏览原始摘要信息
点击此处可从《工业催化》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号