| 钛/钢复合板累积叠轧焊复合工艺的试验研究 |
| |
| 引用本文： | 何春雨,许荣昌,任学平,李红. 钛/钢复合板累积叠轧焊复合工艺的试验研究[J]. 上海金属, 2006, 28(3): 28-31 |
| |
| 作者姓名： | 何春雨 许荣昌 任学平 李红 |
| |
| 作者单位： | 1. 北京科技大学材料科学与工程学院,北京,100083
2. 北京科技大学高效轧制国家工程研究中心 |
| |
| 摘 要： | 进行了TA1/Q235钛/钢的累积叠轧焊试验,研究轧制温度、轧制道次、累积压下量等工艺参数对TA1/Q235复合板组织及结合性能的影响规律。结果表明采用累积叠轧焊方法不仅可以大幅度地提高TA1/Q235的结合强度,而且还可以获得连续均匀、组织细化的Q235的结合组织。
|
| 关 键 词： | 钛/钢复合板 累积叠轧焊 轧制温度 压下工艺 |
| 收稿时间： | 2005-11-09 |
| 修稿时间： | 2005-11-09 |
STUDY ON THE MANUFACTURE OF TA1/Q235 CLAD PLATE BY ARB PROCESS |
| |
| He Chunyu,Xu Rongchang,Ren Xueping,Li Hong. STUDY ON THE MANUFACTURE OF TA1/Q235 CLAD PLATE BY ARB PROCESS[J]. Shanghai Metals, 2006, 28(3): 28-31 |
| |
| Authors: | He Chunyu Xu Rongchang Ren Xueping Li Hong |
| |
| Affiliation: | 1.School of Material Science and Engineering USTB;2.National Engineering Research Center for Advanced Rolling Technology USTB |
| |
| Abstract: | The experiments to manufacture the TA1/Q235 clad plate by the accumulative roll bonding(ARB) process were performed.The influence of the technical parameters,such as the rolling temperature and passes,the accumulated reduction amount,on the microstructure and clad strength of the TA1/Q235 clad plate were studied.The ARB technique not only increased greatly the bonding strength of TA1/Q235 clad plate,but also thinned the microstructure of Q235 plate. |
| |
| Keywords: | TA1/Q235 Clad Plate Accumulative Roll Bonding Rolling Temperature Reduction Process |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
