首页 | 本学科首页   官方微博 | 高级检索  
     

基于蓝牙技术无线通信测试系统的设计
引用本文:徐国盛,刘晓宾,蒋世明.基于蓝牙技术无线通信测试系统的设计[J].电子质量,2009(5):24-25.
作者姓名:徐国盛  刘晓宾  蒋世明
作者单位:1. 潍坊学院信息与控制工程工程学院,山东潍坊,261061
2. 山东潍坊第一中学,山东,潍坊,261205
摘    要:系统是为有毒害气体报警器测试而设计。该系统能够实觋对96路传感器信号的采集,并能够监测到工作环境的温度和湿度。上位机主机采用PC机通过接习电路与蓝牙模块ROK101008相连,PC机软件采用VC++6.0编程,通过串口对蓝牙模块ROK101008进行通信控制;下位机主机利用PIC16C74单片机进行湿度、湿度和气体传感器信号的采集,通过蓝牙模块与上位机进行通信。通过对系统的测试,证明利用蓝牙技术设计的无线通信测试系统能够准确地采集信号,满足工业生产测试的需要。

关 键 词:蓝牙技术  无线通信  测试

Study and Design of Wireless Communication Testing System Based on Bluetooth Technology
Xu Guo-sheng,Li Xiao-bin,Jiang Shi-ming.Study and Design of Wireless Communication Testing System Based on Bluetooth Technology[J].Electronics Quality,2009(5):24-25.
Authors:Xu Guo-sheng  Li Xiao-bin  Jiang Shi-ming
Affiliation:1.Information and control engineering department of Weifang university;Shandong Weifang 261061;2.Weifang No.1 Middie School;Shandong Weifang 261205
Abstract:The designing of this system was for poisonous gas annunciator. This system could collect sensors signal of 96 channels, and gathered signal of environment temperature and humidity. One host was PC that was connected with ROK101008 by interface circuit, and its software was programmed with VC++6.0, the host exchanged digital with ROK101008 by serial communication interface. Other host was PIC16C74 Single-chip that collected signal of temperature, humidity and gaseous senor signal. The temperature sensor was...
Keywords:bluetooth technology  wireless communication  testing  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号