|
|||||
|
|
| Accurate tracking control in LOM application | |
| 作者单位： | Yadong Liu，Congxin Li，Xingui Guo，and Decai WangNational Die & Mould CAD Engineering Research Center，Shanghai Jiaotong University，Shanghai 200030，China |
| 摘 要： | The fabrication of accurate prototype from CAD model directly in short time depends on the accurate tracking control and reference trajectory planning in (Laminated Object Manufacture) LOM application. An improvement on contour accuracy is acquired by the introduction of a tracking controller and a trajectory generation policy. A model of the X-Y positioning system of LOM machine is developed as the design basis of tracking controller. The ZPETC (Zero Phase Error Tracking Controller) is used to eliminate single axis following error, thus reduce the contour error. The simulation is developed on a Maltab model based on a retrofitted LOM machine and the satisfied result is acquired. |
Accurate tracking control in LOM application |
|
| Yadong Liu,Congxin Li,Xingui Guo,Decai Wang. Accurate tracking control in LOM application[J]. Journal of University of Science and Technology Beijing, 2003, 10(1) | |
| Authors: | Yadong Liu Congxin Li Xingui Guo Decai Wang |
| Abstract: | The fabrication of accurate prototype from CAD model directly in short time depends on the accurate tracking control and reference trajectory planning in (Laminated Object Manufacture) LOM application. An improvement on contour accuracy is acquired by the introduction of a tracking controller and a trajectory generation policy. A model of the X-Y positioning system of LOM machine is developed as the design basis of tracking controller. The ZPETC (Zero Phase Error Tracking Controller) is used to eliminate single axis following error, thus reduce the contour error. The simulation is developed on a Maltab model based on a retrofitted LOM machine and the satisfied result is acquired. |
| Keywords: | tracking control LOM ZPETC trajectory planning |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |