| GO-FLOW法在产品装配过程可靠性分析中的应用* |
| |
| 引用本文： | 张根保,崔有志,柳剑,唐贤进,葛红玉.GO-FLOW法在产品装配过程可靠性分析中的应用*[J].计算机应用研究,2011,28(11):4199-4201. |
| |
| 作者姓名： | 张根保 崔有志 柳剑 唐贤进 葛红玉 |
| |
| 作者单位： | 重庆大学机械工程学院,重庆,400030 |
| |
| 基金项目： | 国家“863”计划资助项目（2009AA04Z119）；国家自然科学基金资助项目（50835008）；国家科技重大专项资助项目（2009ZX04014-016，2009ZX04001-013，2009ZX04001-023）；国家重大专项基金资助项目(2010ZX04014-015)；国家重点实验室（华中科技大学）开放基金资助项目 |
| |
| 摘 要： | 借鉴可靠性工程理论，运用GO-FLOW法分析产品装配过程的可靠性。通过分析装配过程各工步之间的关系，建立起产品装配过程可靠性控制的一般框架模型。以齿轮油泵装配过程为例，建立起齿轮油泵装配过程的GO-FLOW图，并分析其信号流、操作符和运算规则；通过GO-FLOW运算，求出各信号流的故障率和可靠度，找到影响产品装配过程可靠性的关键环节。结果表明，GO-FLOW法在产品装配过程可靠性分析中的应用是方便有效的。
|
| 关 键 词： | GO-FLOW法 可靠性分析 装配 多工步 |
Application of GO-FLOW methodology in reliability analysis of product assembly process |
| |
| ZHANG Gen-bao,CUI You-zhi,LIU Jian,TANG Xian-jin,GE Hong-yu.Application of GO-FLOW methodology in reliability analysis of product assembly process[J].Application Research of Computers,2011,28(11):4199-4201. |
| |
| Authors: | ZHANG Gen-bao CUI You-zhi LIU Jian TANG Xian-jin GE Hong-yu |
| |
| Affiliation: | (School of Mechanical Engineering, Chongqing University, Chongqing 400030, China) |
| |
| Abstract: | Based on the theory of reliability engineering, GO-FLOW methodology was employed to analyze the reliability of product assembly process. The common model diagram of product assembly process controlled by reliability was established through analysis of relationship between multi-step processes. The example of assembly process of gear oil pump was provided to establish its GO-FLOW chart and analyze its signals, operators and calculation rules. GO-FLOW algorithm was performed to determine the failure probability and reliability of signals, so as to find out the key that affected the reliability of product assembly process. The result shows that GO-FLOW methodology is simple and useful in reliability analysis of product assembly process. |
| |
| Keywords: | GO-FLOW methodology reliability analysis assembly multi-step |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《计算机应用研究》浏览原始摘要信息 |
|
点击此处可从《计算机应用研究》下载全文 |
