| SiC颗粒增强铝基复合材料的制备及性能 |
| |
| 引用本文： | 冉娜,谢娥,李坤,钟干,黎阳. SiC颗粒增强铝基复合材料的制备及性能[J]. 现代机械, 2012, 0(2): 84-85,94 |
| |
| 作者姓名： | 冉娜 谢娥 李坤 钟干 黎阳 |
| |
| 作者单位： | 贵州师范大学材料与建筑工程学院,贵州贵阳,550014 |
| |
| 基金项目： | 贵州师范大学学生科研基金 |
| |
| 摘 要： | 利用粉末冶金法制备出了SiC颗粒增强铝基复合材料(SiCp/Al),研究了SiC颗粒添加量对复合材料布氏硬度、抗拉强度及显微结构的影响。结果表明:SiC颗粒在基体材料中分布均匀,界面清晰;SiCp/Al复合材料的硬度与抗拉强度随SiC颗粒含量的增加先升高后降低,在SiC颗粒添加量为7 Wt%时,硬度与抗拉强度达到最大值,分别为89.4HBS与311MPa。
|
| 关 键 词： | SiC颗粒 铝基复合材料 硬度 抗拉强度 |
Preparation and Properties of SiC Particulate Reinforenced Aluminium Matrix Composites |
| |
| RAN Na , XIE E , LI Kun , ZHONG Gan , LI Yang. Preparation and Properties of SiC Particulate Reinforenced Aluminium Matrix Composites[J]. Modern Machinery, 2012, 0(2): 84-85,94 |
| |
| Authors: | RAN Na XIE E LI Kun ZHONG Gan LI Yang |
| |
| Affiliation: | RAN Na,XIE E,LI Kun,ZHONG Gan,LI Yang |
| |
| Abstract: | SiC particulate reinforenced aluminium matrix composites(SiCp/Al) were prepared by powder metallurgy method.Effect of SiC particles content on the hardness,tensile strength and microstructure were studied.Results show that distribution of SiC particles in the matrix is uniform and the interface is definition.The hardness and tensile strength of the SiCp/Al composites increase with SiC particles content increases first,and then decrease.When the SiC particles content is 7Wt%,the hardness and tensile strength have the maximum are about 89.4HBS and 311MPa,respectively. |
| |
| Keywords: | SiC particles aluminum matrix composites hardness tensile strength |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
