| 石钢烧结配加马来西亚粉烧结性能的研究 |
| |
| 引用本文： | 李杰,吕庆.石钢烧结配加马来西亚粉烧结性能的研究[J].河北冶金,2011(5):3-6. |
| |
| 作者姓名： | 李杰 吕庆 |
| |
| 作者单位： | 1. 河北理工大学,冶金与能源学院,河北,唐山,063009;河北钢铁集团,石钢公司,河北,石家庄,050031
2. 河北理工大学,冶金与能源学院,河北,唐山,063009 |
| |
| 摘 要： | 研究了石钢烧结生产配加马来西亚粉对烧结矿利用系数、烧结矿转鼓强度及返矿率等指标的影响,试验结果显示烧结矿的冶金性能有所改善,认为在生产条件下配加马来西亚粉烧结是可行的。通过生产跟踪,确定马来西亚粉的最佳配比为10%~15%。
|
| 关 键 词： | 烧结 马来西亚粉 烧结 性能 研究 |
RESEARCH ABOUT ADDING MALAYSIA ORE POWDER IN ORE PROPORTIONING OF SINTERING IN SHISTEEL |
| |
| Li Jie,Lv Qing.RESEARCH ABOUT ADDING MALAYSIA ORE POWDER IN ORE PROPORTIONING OF SINTERING IN SHISTEEL[J].Hebei Metallurgy,2011(5):3-6. |
| |
| Authors: | Li Jie Lv Qing |
| |
| Affiliation: | Li Jie1,2,Lv Qing1(1.Metallurgy and Energy Institute,Hebei University of Science and Engineering,Tangshan,Hebei,063009,2.Shijiazhuang Iron and Steel Company,Hebei Iron and Steel Group,Shijiazhuang,050031) |
| |
| Abstract: | It is studied the influence of adding Malaysia powder in ore proportioning of sintering in Shi Steel on sintering utilization coefficient,drum strength of sinter and return fines ratio.It is proved through test the metallurgical property of sinter improved and the best proportion is 10 to 15 percent. |
| |
| Keywords: | sintering Malaysia powder property research |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
