| 铝电解多功能机组打壳机构改造实践 |
| |
| 引用本文： | 许国友.铝电解多功能机组打壳机构改造实践[J].有色冶金节能,2011,27(2):33-35,32. |
| |
| 作者姓名： | 许国友 |
| |
| 作者单位： | 山西华圣铝业有限公司,山西永济,044501 |
| |
| 摘 要： | 介绍了电解铝用多功能机组直立式打壳机构存在的问题及其对双阳极碳块结构的大型预焙槽运行造成的不良影响,分析了改造前后打壳机构的工作原理,采用新型四连杆打壳机构后,能实现打击电解槽中缝,减少电解槽波动,促进电解槽平稳高效运行的目标。
|
| 关 键 词： | 电解铝 多功能机组 打击头 |
Modification of Crust Breaker Mechanism of Aluminum Electrolysis Multi-Function Unit |
| |
| XU Guo-you.Modification of Crust Breaker Mechanism of Aluminum Electrolysis Multi-Function Unit[J].Energy Saving Of Non-Ferrous Metallurgy,2011,27(2):33-35,32. |
| |
| Authors: | XU Guo-you |
| |
| Abstract: | The existing problems of vertical crust breaker mechanism of aluminum electrolysis multi-function unit and its adverse effect on the running of the large-scale pre-baked aluminum reduction cell with double anode carbon block are introduced.The operating principle of crust breaker mechanism before and after modification is analyzed.After adopting new crust breaker mechanism with four bar,the goal of breaking the middle seam of the reduction cell is achieved,the fluctuation of the reduction cell is reduced,wh... |
| |
| Keywords: | aluminum electrolysis multi-function unit breaking hammer |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
