首页 | 本学科首页   官方微博 | 高级检索  
     

原位反应烧结制备熔盐/尖晶石复合高温相变储能材料的研究
引用本文:许二超,王周福,王玺堂,张保国,刘浩.原位反应烧结制备熔盐/尖晶石复合高温相变储能材料的研究[J].武汉冶金科技大学学报,2010(3):273-276.
作者姓名:许二超  王周福  王玺堂  张保国  刘浩
作者单位:武汉科技大学耐火材料与高温陶瓷国家重点实验室培育基地,湖北武汉430081
基金项目:湖北省自然科学基金资助项目(2009CDB123)
摘    要:以电熔镁砂和白刚玉为镁铝尖晶石陶瓷基体原料,以氯化钾、氟化钾复合盐为相变材料,用原位反应烧结法制备熔盐/尖晶石复合高温相变储能材料,研究烧结温度、熔盐含量对熔盐/尖晶石相变储能材料性能的影响。采用XRD和SEM对材料进行表征,通过DSC分析测定材料相变潜热,结果表明,烧结温度为1 000℃和熔盐含量为40%时,所制备的储能材料的相变潜热为70.98 kJ/kg,蓄热密度为240 kJ/kg(ΔT=100℃),储热性能较好。

关 键 词:反应烧结  熔盐  尖晶石  相变  储能材料

Molten salt/spinel-based composite phase change heat storage materials prepared by in-situ reaction
Authors:Xu Erchao  Wang Zhoufu  Wang Xitang  Zhang Baoguo  Liu Hao
Affiliation:(The State Key Laboratory Breeding Base of Refractories and Ceramics,Wuhan University of Science and Technology,Wuhan 430081,China)
Abstract:Molten salt/spinel high-temperature composite phase change energy storage materials were prepared by in-situ reaction method using fused magnesia powder,white corundum powder as the spinel ceramic substrate raw materials and complex salt of potassium chloride,potassium fluoride as phase change materials.The influences of different sinter temperatures and molten salt contents on the performance of molten salt/spinel phase change energy storage materials were investigated.The materials were characterized by XRD and SEM,and DSC thermal analysis was used to measure material latent heat.The results show that the prepared materials have better energy storage performance,phase change latent heat of 70.98 kJ/kg,heat storage density of 240 kJ/kg(ΔT = 100 ℃) under the condition of sintering temperature at 1 000 ℃ and molten salt content at 40%.
Keywords:reaction sintering  molten salt  spinel  phase change  energy storage materials
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号