| Ti8LC合金热处理力学性能的回归分析 |
| |
| 引用本文： | 舒大禹,景蓉,杨谋,胡传凯,康凤,黄树海,宁海青,赵祖德.Ti8LC合金热处理力学性能的回归分析[J].金属成形工艺,2010(5):1-5. |
| |
| 作者姓名： | 舒大禹 景蓉 杨谋 胡传凯 康凤 黄树海 宁海青 赵祖德 |
| |
| 作者单位： | [1]中国兵器工业第五九研究所,重庆400039 [2]国防科技工业精密塑性成形技术研究应用中心,重庆400039 [3]中国兵器工业第203所,西安710065 [4]重庆长安跨越车辆有限公司,重庆400026 |
| |
| 基金项目： | 总装备部预研项目（51312050107） |
| |
| 摘 要： | 采用正交试验设计了Ti8LC合金的热处理制度，并测试了不同热处理制度下Ti8LC合金的室温抗拉强度，利用多元回归模型对Ti8LC合金的热处理制度与抗拉强度进行了回归分析，建立了热处理制度与抗拉强度之间的回归方程，通过方差分析验证了该回归方程具有较高的可信度。同时分析了Ti8LC合金抗拉强度与合金相的体积分数及晶粒尺寸的关系，得到了合金室温抗拉强度与合金相的体积分数及晶粒尺寸近似呈线性关系，并从微观组织结构分析了合金相的体积分数、晶粒尺寸与热处理温度、时间之间的关系。
|
| 关 键 词： | Ti8LC合金 回归分析 抗拉强度 显微组织 |
The Regression Analysis of Heat Treatment on Mechanical Properties of Ti8LC Alloy |
| |
| SHUDa-yu,JING Rong,YANG Mou,HU Chuan-kai,KANG Feng,HUANG Shu-hai,NING Hai-qing,ZHAO Zu-de.The Regression Analysis of Heat Treatment on Mechanical Properties of Ti8LC Alloy[J].Metal Forming Technology,2010(5):1-5. |
| |
| Authors: | SHUDa-yu JING Rong YANG Mou HU Chuan-kai KANG Feng HUANG Shu-hai NING Hai-qing ZHAO Zu-de |
| |
| Affiliation: | 1. No. 59 Institute of China Ordnance Industry, Chongqing 400039, China; 2. National Defence Research and Application Center of Precision Plastic Forming Technology, Chongqing 400039, China; 3. No. 203 Research Institute of China Ordnance Industries, Xi＇an 710065 ,China; 4. Chongqing Changan Kuayue Automobile Co. Ltd. , Chongqing 400026, China) |
| |
| Abstract: | Heat treatment system of Ti8LC alloy was designed by use of the method of orthogonal experiment and the tensile strength at room temperature under different heat treatment systems was tested. Furthermore, regression analysis was carried out to the heat treatment and tensile strength of Ti8LC alloy based on multiple regression model and regression equations between heat treatment system and tensile strength were established. The high credibility of regression equations was verified through the analysis of variance. By analysis of the relationship between tensile strength, volume fraction of alloy phase and grain size it was known that the relationship was similar to linear relationship. Besides, the relationship between volume fraction of alloy phase, grain size and temperature, time of heat treatment was established based on microstructure analysis. |
| |
| Keywords: | Ti8LC alloy regression analysis tensile strength microstrueture |
| 本文献已被 维普 等数据库收录！ |
|
